MakerBot Digitizer Bedienungsanleitung PDF herunterladen (Seite 32)

32

CALIBRATE YOUR MAKERBOT DIGITIZER

Locate the calibration tool from

the accessory box and place it on

the turntable with the letter A pointing

up, as shown on the screen. Insert the

tab on the lower edge of the calibration

tool into the hole at the center of the

turntable. Ensure that the calibration

tool is positioned as shown before

clicking Continue.

Flip the calibration tool so that the

letter B points up as shown on the

screen, and insert the tab on the lower

edge of the calibration tool into the hole

at the center of the turntable. Ensure

that the calibration tool is positioned as

shown before clicking Continue.

3 Calibrate the MakerBot Digitizer Camera

4 Calibrate the MakerBot Digitizer Turntable

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 73 74

Kommentare zu diesen Handbüchern

Keine Kommentare