MakerBot Replicator 2 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach 3D-Drucker MakerBot Replicator 2 herunter. MakerBot Replicator 2 User manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken

Inhaltsverzeichnis

Seite 2

Setting Up Your MakerBot® Replicator®2 Desktop 3D Printer2

Seite 3 - TABLE OF CONTENTS

11When you set up your MakerBot® Replicator®2Desktop 3D Printer, remember that it was built and packaged very carefully at the MakerBot factory. We ho

Seite 4 - Let’s get started

12Filament guide tubePower supply and cableHex wrenches PTFE-based greaseSpool holderUSB-A to USB-B cableSupport card Blue tape sheetsSD card11 11 1

Seite 5 - WELCOME, LET’S GET STARTED

13MAKERBOT REPLICATOR 2 DIAGRAM8102113756491[1] GANTRY SYSTEM[2] LCD PANEL[3] KEY PAD[4] THREADED Z-AXIS ROD[5] BUILD PLATE[6] BUILD PLATFORM[7] FILAM

Seite 6 - SAFETY AND COMPLIANCE

14UNPACKING YOUR MAKERBOT REPLICATOR 21a. Place the MakerBot Replicator 2 box on the ground and open it.1b. The foam tray at the top of the box contai

Seite 7

15UNPACKING YOUR MAKERBOT REPLICATOR 2 CONTINUED2a. Open the plastic covering and firmly grasp the frame of the MakerBot Replicator 2 from the outsid

Seite 8 - SPECIFICATIONS

16INSTALLING BUILD PLATE4a. Use strong scissors or a wire cutter to cut the zip ties holding the gantry system in place. Discard the zip ties and the

Seite 9 - HOW DOES IT WORK?

17INSTALLING FILAMENT GUIDE TUBE AND SPOOL HOLDER5a. Locate the filament guide tube. Insert one end into the hole at the top of the extruder and push t

Seite 10

18MOUNTING FILAMENT SPOOL7a. Open the box containing the MakerBot PLA Filament. Remove the spool from its bag.7b. Fit the spool onto the spool holder.

Seite 11

198a. Locate the power supply and cable. Attach the cable to the power supply.8b. Ensure that the power switch on the MakerBot Replicator 2 is set to

Seite 13 - MAKERBOT REPLICATOR 2 DIAGRAM

Startup Process: Leveling, Loading, Testing3

Seite 14 - Opening the Box 1

21THE LCD KEYPAD• Four arrow buttons surround a central M button. Use the arrows to navigate through the LCD menus and make selections.• The le arr

Seite 15

22Aer the initial welcome message, the Startup Script will display the following:• If the build platform is too far from the extruder nozzle, or if

Seite 16 - INSTALLING BUILD PLATE

23LEVELING THE BUILD PLATE CONTINUEDLevelingKnobsSupportCardWhen directed by the LCD screen, tighten each of the three knobs under the build platfor

Seite 17 - Installing the Spool Holder

24LEVELING THE BUILD PLATE CONTINUEDThe script will prompt you to adjust the knobs individually. As you adjust each knob, make sure the MakerBot Sup

Seite 18 - MOUNTING FILAMENT SPOOL

25LOADING MAKERBOT PLA FILAMENT When you have completed the initial leveling tasks, the LCD menu will display the following text: “Aaah, that feels mu

Seite 19 - Attaching the Power Supply

26LOADING MAKERBOT PLA FILAMENT CONTINUEDFree the end of the MakerBot PLA Filament from the filament spool. With a pair of scissors, cut a clean edge

Seite 20 - Startup Process:

27Aer you’ve fed the MakerBot PLA Filament all the way through the guide tube, press the M button on the LCD menu. The MakerBot Replicator 2 will sta

Seite 21 - THE LCD KEYPAD

28Push down on the extruder arm. Continue to hold it down as you insert the free end of the filament into the hole in the top of the extruder. Push the

Seite 22 - LEVELING THE BUILD PLATE

29Push the guide tube back into the opening on the top of the extruder.NOTE: If you have problems or need to load the MakerBot PLA Filament again, you

Seite 23 - CONTINUED

31 WELCOME. LET’S GET STARTED 04 Safety and Compliance 06 Specifications 08 How Does it Work? 09 2 SETTING UP YOUR MAKERBOT REPLICATOR 2 DESKTO

Seite 24 - Confirm your Adjustment

30Aer you have successfully leveled the build platform and loaded the MakerBot PLA Filament into the extruder, the LCD panel will ask you: “How’d it

Seite 25 - What You Will Do

31MAKING A TEST OBJECT FROM THE SD CARD CONTINUEDProjects Available on the SD CardCHAIN LINKSFile Name: Chain LinksMake Time: 15 MinutesDesign By:

Seite 26

Making an Object with MakerBot MakerWare4

Seite 27 - Press the M to Continue

33How to make an object using a computer and MakerBot® MakerWare™.MAKING AN OBJECT WITH MAKERBOT MAKERWARE™

Seite 28 - Stop Extrusion

34USING MAKERBOT MAKERWARE1c. Open the installer and follow the directions to install the soware.NOTE: You can find a video of this tutorial at http:

Seite 29 - Remove the Extruded PLA

35Thingiverse is a website where MakerBot users and others can share design files.2a. Open a browser session and go to www.thingiverse.com. Use the sea

Seite 30 - Locate the SD Card

36USING MAKERBOT MAKERWARE CONTINUED3Open MakerBot MakerWare[1] CAMERA HOME: Resets MakerWare to the default view of the object.[2] +/-: Zoom in a

Seite 31 - Space for

37USING MAKERBOT MAKERWARE CONTINUED3Open MakerBot MakerWare | ContinuedNUT AND BOLT Design By: aubencThingiverse: 9095MAKING AN OBJECT WITH MA

Seite 32 - MakerWare

38Minimalist NYC buildings Design By: JonMonaghan Thingiverse: 127624a. Click on the Add button. Navigate to the location of the file FlatIron.stl and

Seite 33 - MakerWare

394e. Click on the Flatiron Building to select it. Hold down the shi key and click on the Woolworth Building. Then release the shi key. Both models

Seite 34 - USING MAKERBOT MAKERWARE

Welcome. Let’s get started.1

Seite 35

405Save your model and toolpath files | ContinuedUSING MAKERBOT MAKERWARE CONTINUED[1] MAKE WITH: Select The Replicator 2, if not already select

Seite 36 - Open MakerBot MakerWare

415c. Insert your SD card into an SD card reader attached to your computer. 5d. Accept the default settings and click the Export! Button. MakerWare wi

Seite 37

42USING MAKERBOT MAKERWARE CONTINUEDUpdating MakerBot MakerWareWe are always improving our products – including MakerWare. Be sure to update your co

Seite 38

43NOTESMAKING AN OBJECT WITH MAKERBOT MAKERWARE

Seite 39

ETroubleshooting, Diagnostics, and Maintenance5

Seite 40

45This chapter describes basic troubleshooting and maintenance tasks for your MakerBot® Replicator®2 Desktop 3D Printer. For details on more advanced

Seite 41 - Print your file

46Can’t load MakerBot PLA Filament into the extruderMake a fresh cut at the end of the MakerBot PLA Filament. Cut the filament at an angle—a narrow ti

Seite 42 - USING REPLICATORG

47PROBLEM SOLUTIONTROUBLESHOOTING CONTINUEDCan’t Remove MakerBot PLA Filament from the ExtruderObject won’t stickto build plateObject is stuck to b

Seite 43

48DIAGNOSTICS LCD PANEL | TOP-LEVEL MENUBUILD FROM SD Displays the list of models on the SD card. Select one to start a build PREHEAT Allows y

Seite 44 - Maintenance

49UTILITIESMonitor ModeDisplays the current temperature of the extruder. When making an object, displays the percent completed.Level Build PlateScript

Seite 45

5This User Guide is designed to start your journey with the MakerBot® Replicator®2 Desktop 3D Printer in the right direction. Even if you are familiar

Seite 46

50INFO AND SETTINGSBot StatisticsDisplays the estimated total hours and minutes of building in the lifetime of your Makerbot Replicator 2 and the dura

Seite 47 - TROUBLESHOOTING CONTINUED

51MAINTENANCEAer approximately 50 hours of build time, you should lubricate the threaded rod on your Z-axis and the X-axis idler pulley. To lubricate

Seite 48

52Lubricating the Threaded Rod and the X-Axis Idler Pulley | Continued7. Locate the X-axis idler pulley. If you are facing the front of the Maker

Seite 49

53MAINTENANCE CONTINUEDCleaning the Drive GearThe drive gear is the part of the extruder that pushes filament through the extruder. When you make thi

Seite 50

54MAINTENANCE CONTINUEDCleaning the Drive Gear | Continued6. Reseat the motor assembly.7. Plug in the motor wires.8. Add the fan guard, the fan,

Seite 51 - MAINTENANCE

55MAINTENANCE CONTINUEDUpdating Your FirmwareKeeping your firmware up to date will ensure that your MakerBot Replicator 2 always operates at its best

Seite 52 - MAINTENANCE CONTINUED

56ACTIVE COOLING FAN: The fan that cools the MakerBot PLA Filament as it extrudes.BLUE TAPE: Blue masking tape that makes a great build surface for

Seite 53

57MOTOR ASSEMBLY: The stepper motor and the drive block that push filament into the extruder.MOTOR WIRES: The bundle of electrical wires that provide

Seite 54

58CONTACT USSUPPORTSALESFEEDBACKmakerbot.com/supportOur website has extensive documentation and troubleshooting information about your MakerBot Replic

Seite 55

59NOTESTROUBLESHOOTING, DIAGNOSTICS, AND MAINTENANCE

Seite 56 - GLOSSARY OF TERMS

6SAFETY AND COMPLIANCESafety alert symbols precede each safety message in this manual. These symbols indicate potential safety hazards that could har

Seite 58 - CONTACT US

61TERMS OF SERVICEWARRANTY, RETURNS, AND REPLACEMENT POLICYMakerBot products do not carry a long-term warranty. Returns are possible only on unaected

Seite 59

62TERMS OF SERVICE CONTINUEDDISCLAIMERS. Neither MakerBot nor any of our aliates warrant the accuracy or completeness of the information, product

Seite 60 - Terms of Service

63NOTESTERMS OF SERVICE

Seite 61 - TERMS OF SERVICE

MakerBot One MetroTech Center, 21st Floor, Brooklyn, NY [email protected] makerbot.com

Seite 62 - TERMS OF SERVICE CONTINUED

7WELCOME, LET’S GET STARTEDSAFETY AND COMPLIANCERADIO AND TELEVISION INTERFERENCEThis equipment has been tested and found to comply with the limits fo

Seite 63

8PRINTING Print Technology: Fused deposition modelingFilament: 1.75 mm MakerBot PLA Filament 1.75 mm MakerBot Flexible FilamentBuild Volume:

Seite 64

9The MakerBot Replicator 2 makes solid, three-dimensional objects out of melted MakerBot PLA Filament. Your 3D design files are translated into instruc

Kommentare zu diesen Handbüchern

Keine Kommentare